Online-Shop
Rapid Patch 2k-Urethane & Instant Plastic Adhesives PLASTIC WELDERS for customer sales & worldwide distribution Rapid Patch Epoxy & Threadlock Kit Pricing TYPE 200plus THREAD LOK 16oz Kits / 550lbs/205litre Barrels How to Weld / Repair all Plastic's 1 888 697 7659 / 1 (306) 291-2920 Custom Build Welders/Tips & Wire Profiles $ 1/2 Price / Plastic Welding Playground Rod / Waterslide Wire 2 Part Dispencer Mixer Tools 1/8" U-Grind Pocket Bit a MUST FOR BOTTOM OUT WELDING CHEMICAL SALES: CORPORATIONS, DEALER, DISTRIBUTOR SALES, agents / Wholesale Chemical Sales Contact Robert (306) 291-2920 PLASTIC WELDING & REPAIR SERVICE (airless & air welding available) Plant 1 (306) 931-8805 Cell (306) 291-2920 Plastic Welding Rods, Flexible Wire, both stock & custom extrusion. We are also able to custom color plus size & for your exact

List All Products


Advanced Search




Lost your Password?
 
     

Rapid Patch® High Performance Epoxy Adhesive Repair Compound   




When you need a smooth, sandable and paintable repair, RapidPatch® is the adhesive repair compound that you need. With five types of RapidPatch® available, we have what you need for your next plastic repair / chemical weld. Available in 4 Litre (1gallon) or 10 Litre (2.5 gallon) cans and convenient 300 mL (10 oz.) tubes. Please call to talk to a representative about pricing and volume discounts.


RapidPatch® Fibre is an extremely versatile product used in the repair of composite plastics and fibreglass. This product is for use in repairing punctures, holes, gouges, cracks and separations, etc. RP Fibre contains 1/20,000 microscopic fibres. If used in conjunction with our fibreglass reinforcement tape, the mechanical strength of the repair is increased. RP Fibre exhibits exceptional lap-shear and peel strength.
RapidPatch® Rigid

is a semi/rigid finishing filler. This product has similar adhesive properties as our fibre product, but finishes repaired areas to an ultra fine finish. RP Rigid is a must in finishing coarse repairs, and can also be used in polyester or metal repairs. RP Rigid exhibits superior peel strength.

RapidPatch® Flexibleis a flexible matrix finishing filler. This product exhibits good flexibility and adhesion. RP Flexible can be used on most flexible/semi-rigid repairs, such as: polyurethane, polypropylene, EPDM, modified polycarbonate, TPO, etc. This product exhibits excellent lap-shear and peel strength.

RapidPatch® GP3 is a modified rubber polymer adhesive. GP-3 is a unique product as it can be used in the repair of truck bodies, automotive panels, motorcycle fairings, boat hulls, underground glass storage tanks, industrial fibre pipe, etc. GP-3 exhibits exceptional flexural modulus, superior adhesion, along with high peel and lap-shear strength. Works on fibreglass, too.

RapidPatch® All Purpose is a blend of our Flexible, Rigid, and Fibre products. Ideal for general purpose repairs.

Ultra Pro Series II hardener is recommended for greater flexural modulus, larger lay-ups and longer cure times. This product has 30% greater adhesion than our universal hardener. Recommended for use with fibre-based repairs or repairs requiring a high degree of flexural strength. UP ll exhibits improved overall performance. Not easily sandable with RP Flexible.


Universal Series I hardener is recommended as a standard quick cure hardener. This product exhibits excellent adhesion.

How to Repair Plastic Using RapidPatch® Epoxy Adhesives

    * Remove frayed areas to be repaired. Rough sand damaged area to be repaired with 40-60 grit sand paper. All joints should be tapered type. Weld or back area to be repaired with our self-adhesive fiberglass reinforcement tape, product number RT890, for added structural integrity.
    * Mix product 1:1 on a plastic mixing board and apply to area of repair with a rubber or plastic applicator. Allow (45-60 minutes) before sanding. Rough sand with 80 grit sand paper. Re-apply if necessary.
    * To finish sand, begin with 150-180 grit sand paper. If necessary, finish sand to 400 grit. Be careful, as material has a high resin content, glazing may occur if sanded too fine.
    * You are now ready to prime and colour coat with either waterborne or solvent-based coatings.


      NOTE: Solvent preparations are not necessarily recommended, as mold release agents can contaminate your repair causing poor adhesion. Sanding is normally sufficient. Do not touch finished area with your hands or other media prior to application of the adhesive fillers or painting.